Contact Us   
Search   
Your Position: Home > Product > Calcium Carbonate

XTCC Special for Automotive Adhesive

Update: 2014/5/6      View:
Introduction

Our XTCC special for adhesive has the advantages of smaller particle, more symmetrical distribution, larger surface area, lower oil absorption and moisture. It can be widely applied in production of automobile base coat, weld adhesive, edgefold gum and swollen glue.Its superiorities are as followed:

1.XTCC gets a good thixotropy. Its chemical property is neutral and stable with low moisture content, so it doesn’t react chemically with the other components in adhesive, such as cured adhesive.
When it is used, quite large amount should be put into the mold. By this way, the cost of adhesive products is reduced significantly. (For example, more than 50% 2.XTCC is used during the silicone rubber gasket production, 20-30% XTCC is used during the polyurethane adhesive production, and 15-30% XTCC is used in primer adhesive.)
3.With its reinforcement, XTCC can improve the mechanical property of adhesive, decrease its shrink rate and expansion coefficient, increase the thermal conductivity, heat resistance, adhesion, mechanical strength(rigidity and compression strength) and corrosion resistance. So the performance of adhesive will be comprehensively improved.
4.After surface treatment, XTCC gets stable viscosity, large throughput, and good workability due to its small particle size and large surface area, which is convenient for spray adhesive manually and mechanically. Besides, it can be used as thixotropic agent to adjust the viscosity of adhesive, thus to improve its sag resistance.
More Products